How To Repair Your Vertical Blinds

Vertical blinds can do a lot for a room. They are often used with sliding windows and doors. They add a fresh and modernized appearance as well as keep out the dazzling sun that may heat the room. The window blinds are often made up of three main parts.

The header is a piece that hangs horizontally from the top frame of the window.

The slats hang vertically off the header. These slats are made of the following material: fabric, plastic, and wood. When properly adjusted, the slats will open or close to allow the amount of light into the room.

The slats are connected with the header through many clips.

After having used the blinds for some time, they tend to be broken in the areas you use most often. It will save you lots of money if you know how to fix these damages.

First thing first, you have to examine to see which section of the window blinds is damaged. When you use plastic blinds, this section is usually the point the slats and the clip meet. Sometimes, the clip itself is broken.

When your vanes are made of fabric, they tend to break at the conjunction with the clip. There are situations when the part that is made of wood or plastic at the bottom of the slat falls out.

However, it is rarely that the header has a problem. When this part of the window blinds malfunctions, the slat is unable to operate correctly. After you have found out what is wrong with your window blinds, it is time to start fixing it.

In case the vane is broken, you will have to replace it. The process is very quick and easy. You just have to go out and buy a replacement and install on clip. This can entirely be done by hand; no special equipment is needed. However, if the clip needs to be tightened, you can use a screwdriver to apply pressure to it. When you do so, remember to be gentle so as not to damage it.

If you have a fabric vane, there may be torn parts that need to be taken care of. You can use a needle and thread to fix the torn parts. If the piece near the conjunction with the clip is also damaged, the vane will fall down. In order to fix this, you need to cut a small portion of the vane and adhere it to the frayed part.

Replacing the blind clips is rather easy. In most cases you will need to replace the clip, but sometimes, you only need to replace a portion of it. First you need to remove the old clip and put the new clip in. You should make sure the clip is fixed well into the header. After fitting it to the header, you can insert the slat into the clips in the same direction as other slats are.

If there header is broken, the problem will not very easily resolved. You must first check to see whether the vertical blinds are still under warranty before doing any repair work. The only component of the header that can be repaired at home is the chain. You have to change the worn chain with a new one to repair it. If other components such as the holder or the veins of the header are damaged, you should hire a professional to do the job.

Visit for a special offer on window blinds. Stop by Jerrikat Jennison’s site where you can find out all about vertical blinds and what they can do for you in your home or office.

-

More on the Main Topic of Window Blinds Shades

Blackout Window Blinds – Perfect for Daytime Sleep and control the amount of sunlight into the room

Blinds and Shades – Find the Perfect Blinds and Shades for your house and room for you window treatments and enhancement

Cheap Mini Blinds – Learn how to Buy Cheap Mini Blinds at discounted prices and best Deals online

Blinds Shades – Choose from amongst the many Blinds Shades online from a huge selections of trending, stylish, colors and make

Curtains Blinds – Learn how you can get the best and cheapest curtains and blinds for your window treatments and coverings

Thanks

Incoming search terms for the article:

Share and Enjoy:
  • Print
  • Digg
  • StumbleUpon
  • del.icio.us
  • Facebook
  • Yahoo! Buzz
  • Twitter
  • Google Bookmarks
Share